Sanyo SC-N525T, Инструкция по эксплуатации

Страница: 2 / 8

Change the switch lever according to the area you want to vacuum.
TM
TURBO CLEAN /
Caution
Please do not vacuum on the floor while the switch lever is set to "HIGH", as this may
damage the floor.
TM When the dust compartment is full, the TURBO CLEAN may turn slowly.
Please empty the dust compartment.
TM
Warning- To reduce the risk of injury, unplug before connecting the TURBO CLEAN .
The "TURBO CLEAN" turns at a high speed. It is
ideal for vacuuming on the rug when the switch
lever is selected to this position.
The "TURBO CLEAN" turns at a low speed. It is ideal
for vacuuming on the floor when the switch lever is
selected to this position.
Set the POWER CONTROL to MAX for maximum
suction. In the position MIN the suction power is
decreased.
MIN
MAX
DUST INDICATOR DUST INDICATOR
Dust Indicator /
Vacuuming can continue.
The dust indicator shows the amount of dust that has been
collected in the dust compartment. Hold the floor nozzle away
from the floor, while operating to check.
Suction power decreases.The dust
compartment should be emptied.
The full vacuum power of the cleaner may be too
strong in certain cases, for instance when vacuuming
curtains and draperies. In these cases, turn the
vacuum power adjustment ring (on the hose)
to control the vacuum power.
Match the hole in the ring with the hose
hole to reduce the power.
Vacuum Power Adjustment Ring /
Unclogging the Hose /
When the hose is clogged with dust, remove it in the following manner:
1)Pull out the angled pipe by turning the removal ring in either direction.
2)Use a vinyl garden hose to push out the dust clogging the hose.
3)Insert the angled pipe in place and return the ring to its original position.
Do not use the hose without the angled pipe in place. If the hose
is used without the angled pipe, the hose will bend excessively,
causing it to break.
NAME AND FUNCTION OF PARTS (Assemble as indicated in the center illustration.) /
Cord rewind button
Cord Rewind Button /
To pull the cord back into the unit, press the cord rewind button.
Caution
Hold the plug when rewinding the cord so
that the plug does not damage furniture,
hands, the vacuum cleaner or the cord by
hitting them. Holding the plug will make
rewinding smoother.
Vacuum power
adjustment ring
Switch /
Press the ON side of the switch
to start the motor.
To stop the motor, press the
OFF side of the switch.
OFF ON
Pipe holder
Put the round brush
here when not in use.
Extension Pipe/
Angled pipe
Hose
Connect the angled pipe
Insert securely by turning
Angled pipe
Removal ring
Hose Stopper /
Insert the hose all the way
up to the hose stopper.
To detach it, press the hose
stopper and pull the hose
toward you.
Pull out the cord and connect
the plug.
Do not extend the cord from
the unit beyond the red
marker line.
Cord and Plug /
Caution:
*Please do not place your hand on the
spring latch during operation.
*Please do hold spring latch when
adjusting the length.
Spring latch
The pipe is adjustable according to th height of the user.
(How to expand/contract the pipe)
Hold spring latch and pull out or push in wand to required length.
*Make sure that you hear a clicking sound.
Handle
OFF ON
Use blower to blow dust behind furniture, etc.
1. Insert the hose into the exhaust outlet.
2. Press the ON side of the switch.
The crevice attachment can be used to blow dust.
Blower (Exhaust outlet) /
Power Control /
Low/
High/
-
Switch Lever
LOW
HIGH
Crevice tool /
For vacuuming edges and gaps.
Round brush /
The head of the brush can rotate.
For vacuuming fragile or easily scratched items.
Attachments /
Hard floor tool /
For vacuuming hard floor.