Sanyo SC-N500, Инструкция по эксплуатации

Страница: 2 / 6

Pipe holder
Put the round brush
here when not in use.
OFF ON
Dust Indicator /
For vacuuming edges and gaps.
Crevice tool/
Attachments /
Round brush /
The head of the brush can rotate.
For vacuuming fragile or easily
scratched items.
Cloth Bag Type
One cloth bag set in
the vacuum cleaner.
Handle
Hose Stopper/
Insert the hose all the way up to the
hose s topper.
To detach it, press the hose stopper
and pull the hose toward you.
Pull out the cord and connect the plug.
Do not extend the cord from the unit beyond the red marker line.
Cord and Plug /
Cord Rewind Button /
To pull the cord back into the unit, press the cord rewind button.
Caution:
Hold the plug when rewinding the cord so that the plug
does not damage furniture, hands, the vacuum cleaner
or the cord by hitting them. Holding the plug will make
rewinding smoother.
Cord rewind button
Unclogging the Hose /
When the hose is clogged with dust, remove it in the following manner:
1) Pull out the angled pipe by turning the removal ring in either direction.
2) Use a vinyl garden hose to push out the dust clogging the hose.
3) Insert the angled pipe in place and return the ring to its original position.
Do not use the hose without the angled pipe in place. If the hose is used
without the angled pipe, the hose will bend excessively, causing it to break.
Angled pipe
Removal ring
NAME AND FUNCTION OF PARTS (Assemble as indicated in the center illustration.) /
Floor Nozzle /
The two-way floor nozzle has lever with two positions.
FLOOR:
For vacuuming wooden floors, linoleum or
plastic covered floors.
RUG:
For vacuuming rugs and carpets.
T
FLOOR
RUG
FLOOR
RUG
The dust indicator shows the amount of dust that has been collected in the dust
compartment. Hold the floor nozzle away from the floor, while operating to check.
DUST INDICATOR
DUST INDICATOR
Vacuuming can continue. Suction power decreases. Dust compartment
should be emptied.
Switch /
Press the ON side of the switch to
start the motor.
To stop the motor, press the OFF
side of the switch.
ON
OFF
Connect the angled pipe
Angled pipe
Hose
The full vacuum power of the cleaner may be too strong in certain cases, for
instance when vacuuming curtains and draperies. In these cases, turn the
vacuum power adjustment ring (on the hose) to control the vacuum power.
Match the hole in the ring with the hose hole to reduce the power.
Vacuum Power Adjustment Ring /
Vacuum power
adjustment ring
Extension Pipe/
The pipe is adjustable according to the height
of the user.
How to adjust the pipe:
Hold the position as shown in
the figure and extend the pipe
by pulling upward.
Hold the position as shown in
the figure and shorten the
pipe by pushing downward.
Hold here
Pull
Push