background image

9

OI-642-09EG

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

Remote Control Unit (continued)

No display : The timer does not operate.

: The air conditioner stops at the set time.

: The air conditioner starts at the set time.

: The air conditioner stops and starts, or starts and stops, at

the set times every day. For details, see “Setting the Timer”.

ECONOMY button

For details, see “ECONOMY Mode”.  When you press this button in the
HEAT, DRY or COOL mode, the 

 mark appears in the display, and the

remote control unit will automatically adjust the set temperature to
save energy.

MODE selector button

Use this button to select AUTO, HEAT, DRY or COOL mode.

(AUTO)

: When this setting is selected, the air conditioner calculates the

difference between the outdoor temperature and the room
temperature and automatically switches to the “COOL”, “DRY”
or “HEAT” mode as appropriate.

(HEAT)

: The air conditioner makes the room warmer.

(DRY)

 

: The air conditioner reduces the humidity in the room.

 (COOL)

: The air conditioner makes the room cooler.

FLAP button

Press this button either to select the setting of the airflow direction to
the auto. flap in each mode or one of the six possible positions
manually or to select the sweep function which moves the flap up and
down automatically.

: Auto flap setting: If selected in a heating operation, the  flap is set

to position (3) in the following chart. If selected in a cooling or dry
operation, the flap is set at position (7) in the following chart.

: The airflow direction can be set manually. (six positions)

: The flap moves up and down automatically.

NOTE

When you press the FLAP button, the air flow direction will be changed
one by one as follows.

FAN SPEED selector button

:  The air conditioner automatically decides the fan speeds.

: High fan speed

: Medium fan speed

: Low fan speed

ACL button (ALL CLEAR)

Puts the remote control unit into pre-operation status. Always press this
button after replacing the batteries.

ON TIME/OFF TIME

setting buttons

Swing

01ENA̲SAP-KV94GJH̲p2-21

03.4.9, 1:16 PM

Page 9

Adobe PageMaker 6.5J/PPC

Содержание SAP-CV124GJH












Отзывы: