Sanyo SA-126P, Инструкция по эксплуатации

Страница: 10 / 21

6
Notes for installation
Remove
Before removing air conditioner to the other place, you should
contact the seller firstly.
Then it must be done under the direction of the professional
technician. In addition, the charge of this must be paid.
Noise
Electric wiring
Install in a location where is firm enough to avoid the enlargement of noise
and vibration.
Don’t put anything in front of the outlet of outdoor unit to avoid increasing
noise.
Be sure that hot air or noise will not inconvenience neighbors.
Please contact the seller as soon as there is strange noise during operation.
Please use the safety support.
Must connect with ground reliably.
The exclusive circuit must be used. But removable socket can’t be used because poor
contact of it can cause over heat or fire.
Don’t pull the power cord strongly.
In fixed circuit, there must be electricity leakage protection switch and leakage current
is less than 30mA.
Air switch (thermal-magnetic breaker) should be installed in the circuit and its recommended
capacity is
10A (SA-76P, SA-96-P & SA-126P) and 15A (SA-186P).
The fixed wiring should be more than 2.5mm 2 in area.
Exterior View
Inside View
Screw
Bottom Side View
of Drainage Pan Drainage Pan
Exterior V iew
Inside V iew
Screw
Bottom Side V iew
of Drainage Pan Drainage Pan
Note:
Drain hose or tubing can be purchased locally to satisfy your particular needs.
Remove the rubber plug
The drainage pipe shall be steadily connected with the drainage faucet without leakage.