Sanyo PLV-Z800, Руководство по обслуживанию

Страница: 47 / 130

- 47 -
◆
to enter service mode
To enter service mode, press and hold the " MeNu " and
"
INPut
" buttons on the projector simultaneously for 5 seconds.
(Or press and hold the " MeNu " button on the remote control
unit for 20 seconds.) The "
S
" mark appears on the screen. While
the " S " mark is displayed on the screen, press and hold the "
PoINt uP
" and "
PoINt doWN
" buttons on the projector or
" ScreeN " button on the remote control unit for more than
seconds. As shown in a figure, a service mode display appears
on a screen.
◆
to adjust service data
Adjust service data using the following control buttons.
– "
oK
" ..........................................A group number increases.
– " MeNu " ..................................A group number decreases.
– "
PoINt uP
" ..........................An item number increases.
– " PoINt doWN " .................An item number decreases.
– "
PoINt rIGHt
" ..................An adjustment value increases.
– " PoINt LeFt " ......................An adjustment value decreases.
◆
to exit service mode
To quit the service mode, press the " PoWer oN/StANd-BY "
button only once on the projector or the remote control unit .
Service Adjustment Menu operation
Remote Control
Top Control
Electrical Adjustment
Normal Mode "S" mark display
MENU
Service Mode
Input VIDEO
Image Natural
Group No. Data
SANYO
0 0
R 1.00 MF4A
102
Ver.
Service Mode
Service mode
+
DOWN
POWER
ON/STAND-BY
INPUT
UP
+
S