Sanyo PLV-45WR1Z, Руководство по обслуживанию

Страница: 63 / 136

- 63 -
■
Electrical Adjustments
To enter the service mode
To enter the “Service Mode”, press and hold the MENU and INPUT button on the LCD projection TV at the same
time for more than 3 seconds, or press and hold the MENU button on the remote control unit for more than 20 sec-
onds. The service menu appears on the screen as follows.
To adjust service data
Select the adjustment item no. by pressing the point UP or DOWN button , and change the data value by pressing
the point LEFT or RIGHT button . Refer to the “Service Adjustment Data Table” for further description of adjustment
item no. and data value.
To exit the service mode
To exit the service mode, press the POWER ON-OFF button on the LCD projection TV or the remote control unit.
●
Service Adjustment Menu Operation
TempA TempB
SANYO 100
Computer
Fan1 Speed Fan2 Speed Fan3 Speed
23.45
123 70
34.56
80 60 80
Service Mode
LAMP
REPLACE WARNING ON-OFF
d e
INPUT
MENU OK
P
d e
+
7
8
–AUDIO–R
)
Data value
Item No.
Input Mode
Version No.
Note :
This part of display is available at the service mode No.106 - 159.
P
TV MENU MENU
ON
TIMER
OK
AUDIO-S VIDEO-S S.SYS C.SYS
SCREEN AUTO PC FREEZE
LAMP
MODE
Remote Control Front Control
ote :
pla
o
●
erv ce Adju justm men Menu Ope p ratio
D R
NPUT
e