Sanyo PLC-XW65, Руководство пользователя

Страница: 12 / 75

1
Part Names and Functions
To ensure safe operation, please observe the following precautions:
●
Use two (2) AA or LR6 type alkaline batteries.
●
Always replace batteries in sets.
●
Do not use a new battery with a used battery.
●
Avoid contact with water or liquid.
●
Do not expose the remote control to moisture or heat.
●
Do not drop the remote control.
●
If the battery has leaked on the remote control, carefully wipe the case clean and install new
batteries.
●
Risk of explosion if a battery is replaced by an incorrect type.
●
Dispose of used batteries according to the instructions.
Open the battery
compartment lid. Install new batteries
into the compartment. Replace the
compartment lid.
Two AA size batteries
For correct polarity
(+ and –), be sure
battery terminals are in
contact with pins in the
compartment.
Remote Control Battery Installation
1 2 3
Point the remote control toward the
projector (Infrared Remote Receiver)
when pressing any button. Maximum
operating range for the remote control is
about 16.4' (5 m) and 60° in front of the
projector.
Operating Range
16.4'
(5 m)