Sanyo PLC-XW60, Руководство пользователя, Страница: 19 / 75

19
To Enter a PIN code
Select a number by pressing the Point
!
buttons, and
then press the Point button to fix the number and move
the pointer. The number changes to " 6 ". If you fixed
an incorrect number, move the pointer to the number
you want to correct by pressing the Point
button, and
then select the correct number by pressing the Point
!
buttons.
Repeat this step to complete entering a four-digit number.
"1234" is set as the initial PIN code at the factory.
After entering the four-digit number, move the pointer to
"Set" by pressing the Point
button. Press the SELECT
button so that you can start to operate the projector.
If you entered an incorrect PIN code, "PIN code" and the
number (
6666 ) turns red. Enter the correct PIN code all
over again.
What is PIN code?
PIN (Personal Identification Number) code that allows the
person who knows it to operate the projector. Setting a
PIN code prevents unauthorized use of the projector.
A PIN code consists of a four-digit number. Refer to the
PIN code lock function in the Setting on pages 53 and 54
for locking operation of the projector with your PIN code.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer
be started. Set a new PIN code with special care, write
it down in column on page 74 of this manual, and keep
it at hand. Should the PIN code be missing or forgotten,
consult your dealer or service center.
A f t e r t h e O K i c o n
disappears, you can
operate the projector.
PIN Code Input Dialog Box
Note:
If the PIN code number is not input for three minutes
after the PIN code dialog box appeared, the projector
is turned off automatically.
Basic Operation