Sanyo PLC-XU75A Скачать руководство пользователя страница 52

Страница: 52 / 102

-5-

Check the indicators for projector condition.

• • • green.

• • • red

• • • off

• • • blinks green.

When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When

this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replace-

ment counter after replacement of the lamp.

Indicators and Projector Condition

• • • blinks red.

Troubleshooting

Indicators

Projector condition

PoWer

red/green

WArNING

red

LAMP

rePLAce

yellow

The projector is off. (The AC power cord is unplugged.)

The projector is preparing for stand-by or the projection lamp is

being cooled down. The projector cannot be turned on until cool-

ing is completed.

The projector is ready to be turned on with the POWER ON-OFF

button.

The projector is operating normally.

The projector is in the Power management mode.

The temperature inside the projector is abnormally high. The pro-

jector cannot be turned on. When the projector is cooled down

enough and the temperature returns to normal, the POWER indi-

cator emits a red light and the projector can be turned on. (The

WARNING indicator keeps blinking.)

The projector has been cooled down enough and the temperature

returns to normal. When turning on the projector, the WARNING

indicator stops blinking. Check and clean the air filters.

The projector detects an abnormal condition and cannot be turned

on. Check power supply circuit and fans control circuit.

Содержание PLC-XU75A







































































































Результаты поиска

Содержание PLC-XU75A

Отзывы:

Похожие инструкции для PLC-XU75A

Бренды по названию

Популярные бренды

Sanyo PLC-XU75A, Руководство по обслуживанию

Результаты поиска

Содержание PLC-XU75A

Отзывы:

Похожие инструкции для PLC-XU75A

Бренды по названию

Популярные бренды