Sanyo PLC-XR301 - XGA Projector With 3000 Lumens страница 69 Скачать руководство пользователя

Страница: 69 / 77

Check the indicators for projector condition.

• • • green.

• • • red

• • • off

• • • blinks green.

When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator

lights yellow, replace the projection lamp with a new one promptly. (pp. 55, 61)

The projector is off. (The AC power cord is unplugged.)

The projector is in stand-by mode. Press the ON/STAND-BY button

to turn on the projector.

Projector Condition

POWER

red/green

Indicators

LAMP

REPLACE

yellow

WARNING

red



The projector is preparing for stand-by or the projection lamp is

being cooled down. The projector cannot be turned on until cooling

is completed and the POWER indicator stops blinking.



The temperature inside the projector is abnormally high. The

projector cannot be turned on. When the projector is cooled down

enough and the temperature returns to normal, the POWER

indicator stops blinking and the projector can be turned on. (The

WARNING indicator keeps blinking.)



The projector detects an abnormal condition and cannot be turned

on. Unplug the AC power cord and plug it again to turn on the

projector. If the projector is turned off again, unplug the AC power

cord and contact the dealer or the service center for service and

checkup. Do not leave the projector on. It may cause an electric

shock or a fire hazard.



The projector is operating normally.



The projector is in the Power management mode.



The projector has been cooled down enough and the temperature

returns to normal. When turning on the projector, the WARNING

indicator stops blinking.

Indicators and Projector Condition

• • • blinks red.

Appendix

Содержание PLC-XR301 - XGA Projector With 3000 Lumens














































































Результаты поиска

Содержание PLC-XR301 - XGA Projector With 3000 Lumens

Отзывы:

Похожие инструкции для PLC-XR301 - XGA Projector With 3000 Lumens

Бренды по названию

Популярные бренды

Sanyo PLC-XR301 - XGA Projector With 3000 Lumens, Руководство пользователя

Результаты поиска

Содержание PLC-XR301 - XGA Projector With 3000 Lumens

Отзывы:

Похожие инструкции для PLC-XR301 - XGA Projector With 3000 Lumens

Бренды по названию

Популярные бренды