Sanyo PLC-XP51, Руководство по обслуживанию

Страница: 16 / 98

-16-
7 R_V1 134 0 ~ 255 DAC2
✻
Video center adjustment [R]
8 G_V2 154 0 ~ 255 DAC2
✻
Video center adjustment [G]
9 B_V2 154 0 ~ 255 DAC2
✻
Video center adjustment [B]
10 R_V2 154 0 ~ 255 DAC2
✻
Video center adjustment [R]
11 G_CLMP 125 / 210 / 210 / 210 0 ~ 255 PC(not RGB Video) / RGB Video / Video, SCART / Component
✻
Y/G pedestal adjustment
12 B_CLMP 181 / 160 / 220 / 225 0 ~ 255 PC(not RGB Video) / RGB Video / Video, SCART / Component
✻
Cb/B pedestal adjustment
13 R_CLMP 184 / 160 / 220 / 225 0 ~ 255 PC(not RGB Video) / RGB Video / Video, SCART / Component
✻
Cr/R pedestal adjustment
14 SGAIN + - 0 ~ 255
15 SGAIN - 128 0 ~ 255
16 LF_LEV 255 / 255 / 255 / 0 / 0 0 ~ 255 SCART / RGB-480i,575i / YCbCr-480i,575i / VIDEO,S-VIDEO / Others
17 DAC_VRB 35 0 ~ 255
✻
A/D reference voltage bottom adjustment
18 DAC_GY 110 / 115 / 115 0 ~ 255 Composite, SCART / Component / RGB Video
✻
A/D reference voltage top adjustment
19 DAC_BCB 110 / 115 / 115 0 ~ 255 Composite, SCART / Component / RGB Video
20 DAC_RCR 110 / 115 / 115 0 ~ 255 Composite, SCART / Component / RGB Video
Group: 6 TC90A69F
0 Y-EQ_GAIN 3 0 ~ 3
1 Y-EQ_N_C_LIM 3 0 ~ 3
2 V-ENH_GAIN 4 0 ~ 7
3 V_ENH_CORING 2 0 ~ 3
4 NTSC443_SW 1 0 ~ 1 0 : NTSC4.43 1 : PAL60 (Available for NTSC4.43)
Group: 10 Option
0 Lamp Time Monitor - 0 ~ 8738 Read only
1 RS232C Baudrate 0 0 ~ 1 0: 19200bps 1: 9600bps
2 Shootout Mode 0 0 ~ 1 0: Disable 1: Enable
3 Cooling Time 3 0 ~ 15 Set cooling period, 1: 30 sec. 3: 90 sec. 15: 450 sec. 0: continuos
4 Hi-Land SW 0 0 ~ 1 0: Normal 1: Highland mode (Fan spin speed max.)
5 V-Douki SW 0 0 ~ 1 0: Synchronized Vertical 1: non-synchronized Vertical
6 Lamp Total Time - 0 ~ 65535 Read only
7 Net Board RESET 1 0 ~ 1 0: Disable 1: Enable
8 Keystone Option 0 0 ~ 1 0: Maximum correction (fix) 1: Changeable for Input signal
9 Syukka SW 0 0 ~ 10 Set 10 to Shipping Condition
10 Color Shading SW 1 0 ~ 1 0: OFF 1: ON
11 RC Enable/Disable 0 0 ~ 3 0: Both enable 1: Front Disable 2: Rear Disable 3: Both Disable
12 Lamp Dim Level 15 0 ~ 15 0: the darkest 1: the brightest
13 Lamp Warning Time 1500 0 ~ 65535 Unit = hour
14 Forced NOBRAND 0 0 ~ 1 0: Normal 1: No brand
15 Forced Video Mute Off 0 0 ~ 1 0: Video Mute ON 1: Video Mute OFF
16 ANZEN FAN Control Fix SW 0 0 ~ 4 0: Normal 1: Normal min. 2: Normal max 3: Eco min. 4: Eco max
17 DJTR_SW - - Not used
18 HDCP Option 0 0 ~ 3 0: XGA 1: Not XGA
19 HDCP Reset 0 0 ~ 10 Set 10 and write EDID Data for HDCP
20 Auto PC Adj. SW 0 0 ~ 1 0: valid, 1: invalid
21 Gamma SW 1 0 ~ 1 0: invalid, 1: valid
Group: 11 FAN (Fan Control)
0 FAN_TEMP_A_WARNING 460 30 ~ 1000 Temperature to judge abnormal A (Not memorized) Inside projector
1 FAN_TEMP_B_WARNING 800 30 ~ 1000 Temperature to judge abnormal A (Not memorized) Lamp
2 FAN_TEMP_C_WARNING 510 30 ~ 1000 Temperature to judge abnormal A (Not memorized) LCD Panel
3 FAN_TEMP_B-A_WARNING 520 0 ~ 1000
4 FAN_TEMP_C-A_WARNING 200 0 ~ 1000
5 FAN_CONTROL_SW 0 0 or 1 0: Auto-control all Fans 1: Manual control all Fans
6 FAN1 Manual Out 1350 0 ~ 2000 These are effective when FAN_CONTROL_SW is set to "1".
7 FAN2 Manual Out 1350 0 ~ 2000
8 FAN4 Manual Out 1350 0 ~ 2000
9 FAN5 Manual Out 1350 0 ~ 2000
10 FAN6 Manual Out 1350 0 ~ 2000
11 FAN7 Manual Out 1350 0 ~ 2000
12 FAN1 Now Out - Read only Reading voltage of each Fan
13 FAN2 Now Out -
14 FAN4 Now Out -
15 FAN5 Now Out -
16 FAN6 Now Out -
17 FAN7 Now Out -
18 Temp Monitor A - - Read only
19 Temp Monitor B - -
20 Temp Monitor C - -
21 Pressure Monitor - - Read only
22 FAN_BALLAST_SW 0 0 or 1 Fan control depend on Ballast Output Voltage 0: OFF 1: ON
23 Service Target MODE -1 -1 ~ 3 -1: Current Mode 0: Normal Mode 1: Eco Mode
24 Service Target FAN 0 0 ~ 5 Service target 0: FAN1 1: FAN2 2: FAN4 3: FAN5 4: FAN6 5: FAN7
✻
Fan adjustment [Setting]
25 Control Switch 0 Control Switch for the operated Fan 0: Auto 1: Manual
26 Temp Source Range High 400 Control range of Temperature for Temperature Sensor A
27 Temp Source Range Low 330
Electrical Adjustments
No. Adjustment Item Initial Value Range Input source / Description