Sanyo PLC-XP30, Руководство пользователя

Страница: 45 / 76

-45-
■
Caution to Replace Unit Lamp Ballast. (A901)
In case this Unit Lamp Ballast is fault, replace the Unit Lamp Ballast completely, do not replace the individual component.
■
Eep-Roms(IC806/ 808) memorizes the data adjusted at
Service Mode, and should not be replaced except for the case
of defective product.
■
The Uneven Color Correction data is memorized in IC808.
■
Lamp Illumination Time, Data No. 60 of Service Mode, is
memorized in IC806 to indicate the span of Lamp Life.
When IC806 is replaced, Lamp Illumination Time is reset at
the same time.
Lamp Illumination Time can not be set to the previous
value.
■
CAUTION TO REPLACE ASS'Y MAIN.
(In the case Eep-Roms are not damaged.)
When Ass'y Main is replaced, Eep-Roms on new Ass'y Main
should be replaced with the those on previous Ass'y Main.
❏
LAMP ILLUMINATION TIME keep the value as before.
❏
"Uneven Color Correction" and "Other Electrical
Adjustments" are unnecessary.
■
CAUTION TO REPLACE IC808.
(In the case IC808 is damaged.)
When IC is replaced with new one, CPU write in initial data
in IC808. Initial data is not the same data as factory initial
data. After replacing the IC808, readjust the "Uneven Color
Correction."
■
CAUTION TO REPLACE IC806.
(In the case IC806 is damaged.)
When IC is replaced with new one, CPU write in initial data
in IC806. Initial data is not the same data as factory initial
data. After replacing the IC806, readjust the "Electrical
Adjustments".
❏
LAMP ILLUMINATION TIME is reset to the initial
value.
■
CAUTION :
Do not replace
Eep-Roms(IC806/808) unreasonably!
■
Caution to replace parts
Adjustments after Parts Replacement
■
: Readjust necessary
●
: Check necessary
NOTE :
CAUTION TO REPLACE ASS'Y MAIN AND EEP-ROMS (IC806/ 808).
PARTS LIST
Replaced
Parts
Con
ver
g
ence
Adjustment
LCD panels
Polarized glass out
Integrator lens /prism PBS
Relay lens
Polarized glass in
Optical parts (Inside the optical unit)
Ass'y Power
Ass'y Main (see note)
Integrator lens Adjustment Rela
y lens Adjustment
P
olariz
ed glass in
Adjustment
Common-center
-Adjustment
White-balance-Adjustment
Correction-une
ven -color
Other Electrical Adjustments Focus Adjustment P
.F
.C.
Output V
olta
g
e
adjustment +5.9V DC
V
olta
g
e
Adjustment
■
■
■
■
■
●
■
●
■
●
■ ■
■
■
■