Sanyo PLC-XF30, Руководство по обслуживанию

Страница: 36 / 88

-44-
■
Focus of LCD Panel Adjustment
Before Adjustment :
1. Turn on a projector.
2. Set the image to "service mode" and project a green grid pattern on a screen. And adjust green grid pattern
to sharp focus, pressing Focus(
▲
)(
▼
) buttons on the projector or remote control unit.
3. Press Zoom(
▲
)(
▼
) buttons on the projector or remote control unit. And if the focus shifts by the ZOOM
position moves between TELE and WIDE, adjust in the following procedure.
Adjustment :
1. Loosen four screws-A using ball allen wrench.
2. Set image size to the maximum, pressing Zoom(
▲
) button on the projector or remote control unit.
3. Adjust center part of green grid pattern to sharp focus, pressing Focus(
▲
)(
▼
) buttons on the projector or
remote control unit.
4. Set image size to the minimum, pressing Zoom(
▼
) button on the projector or remote control unit.
5. Insert a slot screwdriver into slot-B, turn it and adjust center part and four corners on the green grid pattern to
sharp focus.
6. Repeat steps 2 to 5. If the focus does not shift by the ZOOM position moves between TELE and WIDE, it
will be the completion of adjustment.
7. Tighten four screws-A to fix the assembly LCD panel / prism using ball allen wrench.
SCREW-A
SCREW-A
SLOT-B
SCREW-A
SCREW-A
Prism / LCD Panel
assembly