Sanyo PLC-XC50A Скачать руководство пользователя страница 6

Страница: 6 / 81

Safety Instructions

Openings in the cabinet are provided for ventilation. To

ensure reliable operation of the product and to protect it

from overheating, these openings must not be blocked

or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using

or installing the projector, the following precautions

should be taken.

– Do not put any flammable object or spray can near the

projector, hot air is exhausted from the air vents.

– Keep the exhaust vent at least 3’ (1 m) away from any

objects.

– Do not touch a peripheral part of the exhaust vent,

especially screws and metallic parts. These areas will

become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on the

cabinet will not only get damaged but also may cause

fire hazard by heat.

Cooling fans are provided to cool down the projector.

The fans’ running speed is changed according to the

temperature inside the projector.

When moving the projector, close the slide shutter and

retract adjustable feet to prevent damage to the lens

and cabinet.

When the projector is not in use for an extended

period, put it into a suitable case.

Air Intake Vent

Exhaust Vent

(Hot air exhaust)

Do not pitch the projector more than 20

degrees from above and below.

Do not point the projector up to project an

image.

Do not point the projector down to project

an image.

Do not put the projector on either side to

project an image.

Install the projector properly. Improper Installation may

reduce the lamp life and cause a fire hazard.

Do not roll the projector more than 20

degrees from side to side.

CAUTION IN CARRyING OR TRANSPORTING

THE PROjECTOR

– Do not drop or bump the projector, otherwise

damages or malfunctions may result.

– When carrying the projector, use a suitable carrying

case.

– Do not transport the projector by courier or any

other transport service in an unsuitable transport

case. This may cause damage to the projector.

For information about transporting the projector by

courier or any other transport service, consult your

dealer.

– Do not put the projector in a case before the projector

is cooled enough.

Air flow

Air Circulation

Installing the Projector in Proper Position

Moving the Projector

Содержание PLC-XC50A


















































































Результаты поиска

Содержание PLC-XC50A

Отзывы:

Похожие инструкции для PLC-XC50A

Бренды по названию

Популярные бренды

Sanyo PLC-XC50A, Руководство пользователя

Результаты поиска

Содержание PLC-XC50A

Отзывы:

Похожие инструкции для PLC-XC50A

Бренды по названию

Популярные бренды