Sanyo PID-42NE1, Руководство по обслуживанию

Страница: 15 / 50

15
Disassembly and Assembly instructions
To avoid damaging the LCD panel, lay out a soft
cloth or towel and lay down the unit so the front side is
facing down.
䕔
Precautions when replacing each module
䞉
Always perform the procedure below when replacing each
module.
䞉
Be careful not to overtighten the screws when installing
each module.
2. Preparations
If the pedestal (option) is installed, remove the 2
screws for the pedestal on each side, and then remove the
pedestal.
3. Pedestal (option) removal
First remove the 10 screws on the rear cover, and then
remove the rear cover. (SCR TPG BRZ 4x10)
4. Rear cover removal
SLIDE
42 type
47 type
Main board
Jack board Speaker Speaker
Unit operation
buttons
Input/Output
terminals
Main board
Jack board
Unit operation
buttons
Speaker
Speaker
Input/Output
terminals
This unit is designed so that removing the rear cover reveals
the configuration of the boards.
Boards & Parts location
42V type
䑶
Screws to secure
display unit
䑵
Stand
䑶
Screws to secure
display unit
䑵
Stand
47V type
Power board
Power board