Sanyo PID-42AE1 - 16:9, Инструкция по эксплуатации

Страница: 10 / 22

10
INSTALLATION
Controls and Menus
å
ç
å
The LCD display has a Standby light to show there is power.
Switching into/from standby mode
The Standby mode is used for switching the LCD monitor off for short
periods of time . In standby mode the monitor is switched off but is still
receiving mains power .
●
To turn the monitor into standby mode, press the
4
button .
The blue power indicator illuminates more brightly .
●
To turn the monitor ON from standby mode, press the
4
button
again .
If you find the power indicator flashing, disconnect
power cord from the power outlet and contact our
Service desk.
This warning is a sign to let you know that the
power protection function of this TV set is now
operating .
ç
Control buttons (back cover)
Menu button: Used to display or cancel main menu .
Input/
d
button: Switch between AV1, RGB, AV2, AV3, PC , DVI
or Network mode. It is also used to provide sub
menu selection from the Main Menu .
1
or
2
buttons: provide up and down adjustments .
4
button: To switch to standby mode (to switch off completely
disconnect the monitor from the power supply) .
Menu Operation
Many of your monitors functions are controlled through the menu
function, using the remote control .
MENU
Picture Brightness
Contrast
Color
Tint (only if NTSC equipment is detected)
Sharpness
White Tone
White Tone / R / G / B
Advanced Setting
DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode
Sound
Treble
Bass
Balance
Bass Expander
On / Off
Time
Setup
PC Adj.
Current Time
Schedule
Weekday
On Program
AV1 / RGB / AV2 / AV3 / PC / DVI / Network
Menu Setup
PIP / POP Setup
Initial Settings
Text Language
Tile Mode
AV2 Setting
Western / Eastern / Russian / Arabic / Farsi
Tile Mode Active / H/V_Sets / H/V Location / Bezel H/V Adjustment
RGBHV / YPbPr
Auto Adjust
H-Position
V-Position
Clock
Phase
Language / H/V-Position / Duration / Transparence
PIP/POP Mode / Main/Sub Source / PIP Position
Time
Action
Active
Power On / Power Off
On / Off
1 - 20
Current Weekday
XGA Mode
PC Power save
XGA / WXGA 1366x768
On / Off
During menu operation the bottom of the on screen display will show
which controls can be used for menu navigation .
Press the
MENU button to enter the main menu . Whenever main
menu is accessed initially, PICTURE will be the default selection .
A sub menu is selected using the
5
or
6
button and pressing
the
1
or
2
button when the required sub menu is highlighted .
When you have finished you can press the BACK button to return to
the previous menu, press the MENU button to exit the menu operation .
Picture menu
1. Press the MENU button . PICTURE will be the default selection .
Press the
1
or
2
button to enter .
Set the picture settings for your “ personal ” preference.
2. Use the
5
or
6
button to select eg . Brightness and the
1
or
2
button to adjust levels .
■
White Tone
May be used to adjust the color tone of the picture . Use the
5
or
6
button to select White Tone and press the
1
or
2
button
to enter the sub menu . You can select Personal , Cool , Standard or
Warm settings by using the
1
or
2
button . To adjust the color
tone of the picture by using the
5
or
6
button to select Red(R) ,
Green(G) or Blue(B) and the
1
or
2
button to adjust levels .
These settings will be stored in personal mode automatically .
Power Indicator
Infrared Remote Receiver
GB GB