36
SETTING
SCREEN SAVER FUNCTION
Displaying a still picture (non-movement) for a long time cause afterimage (ghost) on the screen. To neutralize the remaining
image, the Screen saver function (3 modes) is provided. Use the function to protect your Plasma Monitor.
SELECTING SCREEN SAVER
Press the MENU button and the On-Screen Menu will appear.
1
Press the
ed
buttons to select "Screen saver menu" and then
press the OK button. "Screen saver menu" will appear.
2
1
2
PICTURE ROTATION
3
Press the
78
buttons to select "On" and then the
ed
buttons
to select "Cycle time", and press the
78
buttons to select a
desired cycle time.
Cycle time : 15 Min / 30 Min / 60 Min
Press the
ed
buttons to select "Dot", and press the
78
buttons
to select moving distance.
Dot: 4 / 8 / 16 (dots)
The screen saver "Pic rotation" automatically changes the display
position.
Press the
ed
buttons to select either the screen saver "Pic
rotation" or "White pattern". And follow the instructions below to
set up each screen saver
NOTE :
Priority is given to the Power save function over the Screen saver function if
the power save function is set "yes".
SCREEN SAVER MENU
Sound adjustment
Screen adjustment
Picture setup
Initial setup
PC mode adjustment
Screen saver
Information
Picture adjustment
Select
Return
OK
Exit
M E N U
STATUS
O K
78
Screen saver
Pic rotation
Cycle time
Dot
White pattern
On
60 Min
Display time
30 Min
4
Proceed
Side bar
Level1
Select
Return
Select
Exit
7 8
M E N U
STATUS
78
Screen saver
Pic rotation
Cycle time
Dot
White pattern
On
Display time
Side bar
Select
Return
Select
Exit
60 Min
7 8
M E N U
STATUS
78
30 Min
4
Proceed
Level1
NOTE :
Dot cannot be selected when the input signal is "1080i".
WHITE PATTERN
The screen saver "White pattern" displays a blank white screen.
1
2
Press the
ed
buttons to select "Display time", and then press
the
78
buttons to select a desired display time of a blank white
screen.
Display time : 10 Min / 30 Min / 60 Min
Select "White Pattern" with the
ed
buttons and then press
either of the
78
button to display a blank white screen for the
specified time.
To return to the normal screen before the specified display time
passes, press either of the
78
button again.
