-15-
■
Adjustment
Before Adjustment
This adjustment is done to enter Service Mode by Remote
Control Unit
with Multimedia Controller (PDP-SE01)
.
■
To enter Service Mode
Quick operation
is needed to enter Service Mode.
(1) Turn the monitor on.
(2) Press and hold the MENU button on the monitor.
(3) Keep item (2) and press the EXIT button and
release the EXIT button and the MENU button in
order.
(4) After item (3), immediately press the MUTE but-
ton to appear the Service Mode Display.
■
Service Mode Display
■
To return to the Normal Mode
Once turn the Monitor off by pressing “POWER” button on the monitor or remote control unit and turn it on again.
MENU
OK
INPUT
VOLUME
MENU Button
OK
EXIT
MUTE
VOLUME
(
←
) / (
→
)
To select :
Adjustment Item
or Data Setting
To enter
Service Mode
EXIT
MUTE
(
↑
)
●
Adjustment :
UP
●
Data Setting
(
+
)
(
↓
)
●
Adjustment :
DOWN
●
Data Setting
(
–
)
Feb-Dynamic
Cont
0
63 (3F)
Main
Sub
32
035
019
CAUTION
The each circuit has been made by the fine adjustment at factory. Do not attempt to adjust
the following adjustments except requiring the readjustments in servicing otherwise it may
cause loss of performance and product safety.
PDP Time 001396