Sanyo PDG-DWL2500 - 2500 Lumens, Руководство пользователя

Страница: 70 / 82

0
Appendix
Problem Solutions Pages
Image
Image is out of focus.
q
Adjust focus of the projector. 25
q
Provide proper distance between the projector and the
projection screen. 15
q
Check the projection window to see if it needs cleaning. 66
q
Moving the projector from a cool to warm place may result in
moisture condensation on the projection lens. In such cases,
leave the projector off and wait until condensation evaporates.
Picture is not bright enough.
q
Check if the Contrast or Brightness is adjusted properly. 37, 44
q
Check if Image mode is selected properly. 36
q
Check the lamp control function. 28, 58
q
Check the LAMP REPLACE indicator. If it lights, the end of
lamp life is approaching. Replace the lamp with a new one
promptly.
67
The color is strange.
q
Check the Input signal, color system, video system or
computer system mode.
q
Make sure the Colorboard is not selected on Screen Menu. 40, 47
The image is distorted or runs
off.
q
Check PC adjustment Menu or Screen and adjust them. 34-35,
38-40
Setting and adjustment
Auto PC adjustment function
does not work.
q
Check the Input signal. Auto PC function can not work when
80p , 55p , 20p , 80i , 55i or 1080i is selected, or when the
digital signal is input into HDMI terminal.
32, 33
Some displays are not seen
during the operation.
q
Check the Display function. 53
The setting does not remain
after turning off power.
q
Make sure you selected Store after adjusting setting. Some
settings can not be stored if not registered with "Store".
37, 45
Power management does not
work.
q
Power management function can not work while Freeze or No
Show is running.
57
Capture function does not
work.
q
Check the connection and the input signal to see if there is
signal
54
Auto setup does not work
properly.
q
Make sure Off is not selected at any function of Auto setup 51
Top control does not work.
q
The top control is not available if the top control is locked at
Key lock under Security of SETTING section.
59
Remote control
The remote control does not
work.
q
Check the batteries.
q
Make sure no obstruction is between the projector and remote
control.
q
Make sure you are not too far from the projector when using
the remote control. Maximum operating range is 16.4'(5 m).
q
Make sure the code of the remote control is conformed to the
projector’s code. 58
q
Unlock the Key lock function for the remote control function. 59