Sanyo PDG-DSU21B, Руководство по обслуживанию

Страница: 30 / 60

PDG-DSU21 26
4. Troubleshooting and Verifying the Repair
This chapter provides technicians with electronic background how to maintain the product.
Moreover, you can get the appropriate operation to solve some complicated problems of
component repairing and professional problems.
4.1.
Troubleshooting
Warning
„ Do not directly look into the lens to avoid eyesight damages.
„ The projector is equipped with ventilation holes (intake) and ventilation holes (exhaust). Do
not block or place anything near these slots, or internal heat build-up may occur, causing
picture degradation or damage to the projector.
Confirm Software and hardware
(1) Confirm FW version and lamp using hours
(2) Confirm LED indicator
LED Type Color Status Meaning
Lamp LED
Temp LED Green
Off Flash
- The projector is in standby mode.
Lamp LED
Temp LED Green
Green Solid
Flash The projector system has some problems with its fan,
so the projector cannot start up.
Lamp LED
Temp LED Green
Green Solid
Solid The lamp is in good condition and is projecting at
maximum brightness.
Lamp LED
Temp LED Amber
Green Solid
Solid- The lamp has reached its end of life and must be
changed soon. The lamp will continue to operate until
it fails. Change the lamp. If the lamp is off, then the
ballast will become malfunction.
Lamp LED
Temp LED Amber
Amber Solid
Solid- The projector is shutting the fan motor is cooling the
lamp for Shutdown. Do not unplug the power cable or
turn the power switch off before the Lamp LED
Change to Flashing. The fan motor will turn off when
the lamp has cooled.
Lamp LED
Temp LED Green
Red Solid
Flash Temperature is too high. The lamp will turn off. The
fan motor is cooling the lamp.
Lamp LED
Temp LED Amber
Off Solid
- The lamp ignition failed. If temperature is too high,
the fans wi11 be cooling the lamp.
Flash : 2Hz