45
Configuring Options
<OPTION>
8
Set <MENU> to “END” and press the SET button.
R
The specified masks appear on the screen.
■
If you want to return to the previous screen
Select <MENU> – “BACK” and press the SET button.
■
To preview the entire specified masks
1
Select <PREVIEW> and press the SET button.
2
To return to the previous screen, press the SET button again.
■
To cancel the masking setting
Change “ON” of the MASK number to “OFF” in the MASK
selection screen.
■
To change the previously specified masking setting
1
On the MASK selection screen, set the MASK number for
which you want to change the masking setting to “ON” and
press the SET button.
2
Repeat steps from
4
to
7
.
(Example: 4 maskings)
MEMO:
When multiple masking positions
overlap, the masking setting with the
smaller MASK number will be
preceded.
Note:
If masking is set, the camera name will not be displayed on the monitor
even if <TITLE> is “ON”.
3
MASK 1
2
4
4
4
3333
3333
22
22
111
111
MEMO:
If <ALARM SIGN> is “ON” (see page 41), the alarm notification “A” will be
shown on all the masks during the time set in <DURATION> (see page
40) when an alarm signal comes in.
If both of <ALARM SIGN> and <MOTION> (see page 38) are “ON”, the
alarm notification “A” will be shown when the motion sensor detects
movement.
• If an alarm or movement is detected while an unmasked image is
being displayed, an alarm notification “A” appears in the top left
corner.
A
A
AAAA
AAAA
AA
AA
AAA
AAA
A
L5BP2_BQ2_US(GB).book 45 ページ ２００６年９月４日 月曜日 午後４時２４分
