Plenums Direct Airflow
sANYo's plenum design features uniform
cold air flow distribution throughout the
chamber to ensure temperature unifor-
mity—essential for validated storage
requirements.
SANYO's Cyle Defrost System
Defrosting is performed automatically
during compressor "off" cycles, and by
sensing frost levels. This way defrosting
is performed only when required, further
protecting the contents against unneces-
sary temperature rise. The defrosting
heater also acts as an emergency heat
source to prevent samples from freezing
in extremely low ambient temperature
conditions.
Uniform storage is unaffected by
ambient temperature.
An electronic sensor accurately monitors
chamber temperature and feeds the infor-
mation to the microprocessor for precise
control at preset temperature. fans
ensure gentle air circulation to provide
uniform top to bottom temperature control
after frequent door openings. sANYo's
easily calibrated, reliable and stable
controls make validation easier.
Remarkable cooling efficiency.
A highly efficient hermetic compressor,
specially designed and developed by
sANYo, is utilized to provide power-
ful and rapid cooling to maintain proper
temperature level.
p r e s e r v a t i o n
MDF-115
MDF-115
MDF-115
MDF-115
STORAGE
DEFROST SYSTEM
innovation
performance
reliability
support
UNIFORMITY
p r e s e r v a t i o n
COMPRESSOR
MPR-1013R
Equipped with sliding shelves (right side)
Effective capacity: 36.5 cu. ft. (1,034 liters)
Cooling Performance:
2ºC to 14ºC
(Ambient temp. -5ºC to 35ºC)
MPR-513
Effective capacity: 17.2 cu. ft.
Cooling Performance:
2ºC to 14ºC
(Ambient temp. -5ºC to 35ºC)
