8. Change the settings
•
It is possible to change the settings (sterilization temperature, sterilization
time, melting temperature, melting time, heat-retention temperature,
exhaust temperature and exhaust rate) according to need.
The settings that have been changed are saved in memory even when the
power switch is turned OFF. (Once the operation is started, the settings of
the sterilization temperature and melting temperature can not be changed.
The sterilization time, etc. can be changed but not saved in memory.)
(Changeable range: See page 17.)
4) Finally, press the button.
When the setting menu is entered, a buzzer sound is heard and
the changed setting is saved in the program.
The flickering status is left standing for 1min., the changed setting
is not updated and the product turns to be standby status.
(Standby status : See page 15.)
1) Press the button.
Setting menus flicker.
The setting menu moves each time this button is pressed.
2) Press the or button to change the setting.
Beep
Beep
3) Press the button to flicker the next menu.
Press the or button to change the setting.
Press the button.
Repeat this procedure.
Press the or button to change the setting.
For setting menu to be left unchanged, simply press the button.
The setting value is incremented or decremented each time the
or button is pressed.
If the button is kept pressed, the value is rapidly incremented or
decremented and it stops finally at the maximum or minimum value.
1. Liquid Sterilization
Cycle
2. Sterilization/Heat-
retention Cycle
3. Melting/Heat-
retention Cycle
4. Equipment
Sterilization Cycle
Sterilization temperature
Sterilization time
Exhaust temperature
Exhaust rate
Sterilization temperature
Sterilization time
Exhaust temperature
Exhaust rate
Heat-retention temperature
Melting temperature
Melting time
Exhaust rate
Heat-retention temperature
Sterilization temperature
Sterilization time
Exhaust rate
MEMO
Each time the button is pressed, the setting menus flickers one by one in the sequence as follows:
19
How to Use
