manualshive.com logo in svg

Sanyo MDF-U53V, Руководство по обслуживанию

Поделиться
Скачать
Sanyo MDF-U53V Скачать руководство пользователя страница 49

46

 

13

 

   START-UP OF UNIT

 

 

Follow the procedures for the initial and consequent operations of the unit. 

 
1.

 Connect the power cord to the dedicated outlet having appropriate rating with the chamber empty, and 

turn on the power switch on the freezer. 

 

2.

 Turn off the switch of the back-up system (optional component) if it is installed. 

 
3.

 Check that the battery switch is ON.

 

 

4.

 The audible alarm may activated.    In this case, press the buzzer stop key (BUZZER) to silence the 

alarm. 

 

5.

 Set the desired chamber temperature.    See page 14 for the temperature setting. 

 

6.

 Check that the chamber temperature reaches the desired temperature. 

 
7.

 Turn on the switch of back-up system (optional component) if it is installed. 

 

8.

 Check that the alarm lamp lights and the buzzer sounds by pressing the alarm test key. 

 

9. 

After confirming the above, you can put articles into the freezer chamber in a small batch to prevent the 

temperature rise. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание MDF-U53V





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды