11
FREEZER COMPONENTS
1.
Lock
2. Door:
Hinged type. The door can be opened in any angle on the way to full open.
3. Magnetic door gasket:
Seals the door and prevents leakage of cold air.
4. Inner lid:
Serves as a means of reducing cold air leakage when the door is open. Remove the frost
before it is accumulated too much.
5. Access port:
Serves a means of leading the measuring cable from the freezing room to the outside.
6. Caster:
4 casters are provided. They make the moving of the unit easier.
7. Leveling foot:
Serves to adjust the height and to settle the frame.
8. Temperature display area:
The digital temperature indicator, alarm lamp, and filter check lamp are
installed.
9. Exhaust air vent:
Be careful not to block this.
10. Control panel cover
11. Control panel cover lock:
To lock the control panel cover to avoid the setting by accidental
contact.
12. Control panel:
Temperature set key, power switch and so on are installed. AT type has a
temperature recorder and switches of back-up system. Refer to page 12 for details.
13. Back-up system joint (rear side):
It is positioned at rear of the unit. Serves to connect with the
pipelines from the liquid CO
2
cylinder.
14. Side panel:
For cleaning the condenser filter and condenser. The remote alarm terminal is located
inside the panel.
15. Air intake vent (grille):
Do not block this vent to keep the proper cooling performance.