9
NAME AND FUNCTION OF PARTS
1.
Lock
2. Door
3. Magnetic door gasket:
Seals the door and prevents leakage of cold air.
4. Inner lid:
Serves as a means of reducing cold air leakage when the door is open.
5. Access port:
Serves a means of leading the measuring cable from the freezing room to the outside.
6. Caster:
7. Leveling foot:
Serves to adjust the height and to settle the frame.
8. Grille:
Acts as an inlet for air to cool the motor. Be careful not to block this. By pulling down this
grille, you can clean a clogged condenser filter.
9. Exhaust air vent:
Be careful not to block this.
10. Pocket:
Use for instruction manual, notebook or gloves.
11. Control cover lock
12. Control panel cover
13. Control panel:
Refer to page 10.
14. Digital temperature indicator:
This indicator shows the present temperature or setting
temperature.
15. Temperature recorder (ATN type)
16. Remote alarm terminal:
It is located inside of rear cover. Refer to page 14 “Remote alarm
terminal”.
17. Back-up system joint (ATN type):
It is positioned at rear of the unit. Serves to connect with the
pipelines from the liquid N
2
tank at the top right of the rear frame.
