background image

10

11. MOD (=MODE)

Press the button to select radio, tape or CD mode.
When a tape is inserted, each time the button is pressed, the next input source 
is selected in the following order:

12. + TUNE – (=TUNE UP/DOWN)

• Manual Tune Up/Down

Repeatedly press tune buttons ‘ 

 ’ side or ‘ 

+

 ’ side for tuning frequency 

downward or upward in order to substitute the seek function in the weakest 
reception stations.

• Seek Tune Up/Down

Press and hold tune buttons ‘ 

 ’ side or ‘ 

+

 ’ side for several seconds for auto 

tuning frequency downward or upward to next station with a strong signal.

13. AMS (=AUTO MEMORY STORING)

• Preset Scan

Press AMS button shortly to scan the stored stations.
During the preset scanning, it will stop at each station for several seconds and
the number of the channel will flash on the display.  To stop the scanning 
operation, press either AMS button or any one of the channel buttons.

• Auto Memory Store

Press AMS button for several seconds to enable auto seek function in the 
selected band and store the first six stations which are found.  LCD display 
indicates “ATP” during auto memory store operation.

14. M1, M2, M3, M4, M5, M6

Press to preset stations at tuner mode.  With this system, a total of 30 stations 
can be stored in the memory’s six buttons.  The stations might be FM1, FM2, 
FM3, AM1 and AM2 bands.
The operation is as follows:

• Store in Memory

Press and hold desired memory location button for several seconds.
The current listening station will be stored into the number button.

• Retrieve a Preset Station

Press any one of the buttons (1 to 6) to retrieve a station which had been stored
in the memory in advance.  The chosen number is shown on display.

15. PROGRAM BUTTON

These 2 buttons perform the dual functions of changing the direction of tape 
playback and fast forward/rewind of the tape.

• Change Tape Playback Direction

Press both buttons together to play the other side of a tape.

• Fast Forward/Rewind

Press the button with the double arrows pointing the same direction as the 
direction indicator on the LCD to fast forward, press other button in the opposite
direction to fast rewind.

RADIO

CD

TAPE

Содержание MAR-B3089

















Отзывы: