-4-
Release Lens Lock (Clockwise)
Fix Lens Lock (Anticlockwise)
Fig-6
Fig-7
Pinch the tab and
turn the lever
clockwise to unlock
the lens.
Pinch the tab and
turn the lever anti-
clockwise to lock
the lens.
CAUTION:
Turn the Lens Lock Lever anticlockwise until the lens is locked. Make sure
the lens is securely installed after installation.
Focus Lock Screw
Focus Lock Ring
FOCUS ADJUSTMENT (For Model LNS-W07)
Set up the projector and project image on the screen.
1. Loosen the Focus Lock Screw on the projection
lens.
2. Rotate the projection lens to obtain proper focus
on center area of the screen.
3. Lock the Focus Lock Screw securely.
When proper focus is not observed at outer area of
the screen, proceed following adjustments.
4. Loosen the Focus Lock Ring on the projection
lens. (Turn the Lock Ring counter-clockwise.)
5. Rotate the lens to obtain proper focus on outer
area of the screen.
6. Lock the Focus Lock Ring securely. (Turn the Lock
Ring to clockwise.)
If proper focus is not observed over the entire screen,
repeat above adjustments 1~ 6.
