Sanyo LED-32XR10FH, Руководство по обслуживанию

Страница: 15 / 48

Fig. 5 Option switches
f) Burning process has two steps: Erase and Program; please refer to Fig. 6;
Fig. 6 Option switches
1) First, the step “ Erasing… ” will last for some time, or it is failed if it is passed by quickly,
please confirm procedure 2
）
and begin burning process again;
2) Then the following step is “ Programming…;
3) A prompt “ Pass ” will display at last;
g) A prompt “ Pass ” will display if burning process is successful, please refer to Fig. 7;
Fig. 7 Successful burning process
h) If there are other machines to be burned, remain ISP burning interface and repeat procedures
c
）
to e
）
only;