Sanyo LCD-24XR11F, Инструкция по эксплуатации

Страница: 29 / 40

Adjusting the Computer Image & Setting Hotel Mode
Adjusting the PC image
To adjust the computer image:
1
Press 5 or 6 repeatedly to scroll the menu page until you
select the Screen item, then press 4 or OK to access.
2
Press MENU . The on-screen menu opens with PICTURE
menu displayed.
!
Auto Adjust — Automatically adjusts the image settings
such as position and phase.
!
Horizontal Pos. — Moves the image right or left.
!
Vertical Pos. — Moves the image up or down.
!
Size — Adjust the horizontal width of the image on the
screen.
!
Phase — Adjusts the focus of stable images.
4
Press
6
or
5
to highlight an option, press
3
or
4
to adjust
the level, or press OK to confirm. You can select:
3
To close the menu, press EXIT button.
Setting Hotel Mode
To set Hotel Mode
Screen
Before adjusting the screen, make sure that you select the
correct source (D-SUB).
Horizontal Pos.
50
Vertical Pos. 50
Phase
Size
60
Auto Adjust
Hotel Mode feature enables you to lock CHANNEL menu, set
maximum volume, lock other sources except AV, lock panel
buttons, etc. which is especially useful at Hotel environment.
Volume Max
AV Lock
Press < OK > to Save
Panel Lock
100
Off
Off
RF Auto Off
1
Press INPUT button. The Input Source menu opens.
2
Press number buttons: [ 5 , 8 , 2 ] to access the Hotel Mode
screen . Be sure to quickly input the numbers while the
Input Source menu is still visible.
3
Within the menu, press 6 or 5 to highlight an option, press
3 or 4 to adjust the option. You can select:
4
Press OK to save the setting. Press EXIT to exit the menu
screen directly.
!
CHANNEL menu, the CHANNEL menu will be grayed
out and can not be accessed. To cancel the lock, set it to
Off .
!
Volume Max — Sets the maximum volume (30–100) for
the TV.
!
AV Lock — Turns On to fix the input source to AV , only
AV programme can be viewed while all other sources are
blocked. To cancel the lock, set it to
Off .
!
Panel Lock — Turns On to lock panel buttons, buttons
on the control panel on the TV are not active. To restore,
set it to
Off .
!
RF Auto — When On is set, the TV will automatically go
to standby if without RF signal input for several minutes. If
Off is set, the TV will still work even if there is no RF signal
input.
Channel Preset Lock — Turns On to lock the
29
Channel Preset Lock On
HDMI Black Level
Normal
50
PICTURE SOUND TIME OPTION LOCK CHANNEL
PICTURE SOUND TIME OPTION LOCK CHANNEL
HOTEL MODE
Select Move
MENU
Return
Select Move
MENU
Return