Sanyo LCD-22XR9DZ, Инструкция по эксплуатации

Страница: 17 / 41

Basic Operations
(Continued)
14
Installation Guide
Exit
Exit
Language English
Start
OK
Auto Tuning
Country Selection New Zealand
Cancel Start
First Time Setup
1
3
Make sure that:
The Language item will be highlighted automatically.
Press
3
or
4
to select a desired OSD language.
The first time you use the TV, you need to set up the TV.
!
You have installed the batteries in the remote control.
!
You have connected the TV to an antenna or cable TV outlet.
!
You have connected the power cord.
2
Press POWER to turn on the TV. After a few seconds
the Installation Guide screen opens.
4
Press
5
or
6
to select Auto Tuning item, and press OK to
confirm the selection.
With the power on, press the Power button on the remote control to turn off the unit, and put the unit in standby mode. To
cut off the power completely, press the Power Switch directly.
Turning On
Insert the power cord into the wall outlet. Press the Power Switch on the unit to power on.
If the unit is in standby mode, press SOURCE on the unit or Power button on the remote control to turn on the unit, and
you will be ready to use its features.
Turning Off
Turning On/Off the Power
Installation Guide
Exit
Exit
Language English
Start
OK
Auto Tuning
Installation Guide
Exit
Exit
Start
OK
Auto Tuning
Language English
4
Now a pop-up screen opens. Press 3 or 4 to select a proper
country according to your local area, and then press
6
or OK
to highlight Start item, and press OK to begin the auto
channel search.