Sanyo Katana DLX, Руководство пользователя

Страница: 40 / 336

22 Section 2A: Phone Basics
Turning Your Phone On and Off
Turning Your Phone On
To turn your phone on:
©
Press .
Once your phone is on, it may display “Looking for service...,”
which indicates that your phone is searching for a signal.
When your phone finds a signal, it automatically enters
standby mode – the phone’s idle state. At this point, you are
ready to begin making and receiving calls.
If your phone is unable to find a signal, a Power Save feature is
automatically activated. When a signal is found, your phone
automatically returns to standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for Sprint service by pressing any key (when your
phone is turned on).
Turning Your Phone Off
Toturn your phone off:
©
Press and hold for two seconds until you see the
powering down animation on the display screen.
Your screen remains blank while your phone is off (unless the
battery is charging).
Tip: The Power Save feature helps to conserve your battery power
when you are in an area where there is no signal.