Sanyo HV-DX350A, Инструкция по эксплуатации

Страница: 15 / 66

12 13
Connecting your player with a RF lead
12 13
Connecting your player with a RF lead
Installation
■
Before you start, unplug all the equipment from the mains supply.
(Option 1) - How to connect with RF lead
■
Before you start, unplug all the equipment from the mains supply.
(Option 2) - How to Connect with Audio/Video jack
Aerial
The type of aerial you should use,
depends on local interference and
how far you are from the
transmitter. You should contact a
local retailer if you have any
questions about your aerial.
In option (1) you need to tune your television to the player so you can see the picture from the player. When it
is on the player generates a signal on UHF transmission channel 36, but this might change after tuning in the
stations with 'AUTO-SEARCH' . See the 'Check it out' box on page 18. See your television manual for how to
tune in a new channel.
INPUT 1
ANT IN
INPUT 2
REAR PANEL OF DVD-VIDEO
OUTSIDE ANTENNA OR
WALL ANTENNA OUTLET
REAR PANEL OF TV
RF CABLE
¡
Remove circular cable (RF cable) (surplus cable) plugged in “ANT.IN” jack in rear panel of TV.
Connect the cable to “
ANT ” jack in rear panel of DVD-Video.
™
Connect TV to DVD-Video. Connect “ TV ” jack in DVD-Video with “ ANT.IN ” jack in TV with RF
cable.
INPUT 1
ANT IN
INPUT 2
REAR PANEL OF DVD-VIDEO
REAR PANEL OF TV
AUDIO/VIDEO CABLE
£
(If there is Audio/Video InPUT jack in TV)
Connect Video Out jack in DVD-Video to Video In jack in TV, and AUDIO Out jack in DVD-Video to
AUDIO IN jack in TV with connecting cable of Audio/Video jack.
Select VCR mode by pressing TV/INPUT button in TV, you can view a clearer screen and sound than
connection with RF cable only.
• VHF: 1 ~11 channels of TV / • UHF: 21~69 channels of TV
• CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station and
consumers. It does not need any antenna.
• In/Out jack in Audio/Video terminal:
- In: A jack used to receive signal required in this unit from other units.
- Out: A jack used to send signal of this unit to other units.
• Connect with Audio/Video terminal, you can enjoy more clear video and audio.
(Use INPUT button in this REMOTE to select video mode.)