Before Operation - VCR part
12
Video channel Set
Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from
the DVD+VCR through the RF aerial cable.
If you have used a
SCART
lead you will not have to tune
your TV, simply select the
AV
channel. The
AV
channel
is already pre-tuned for optimum video playback on
your TV.
Perform the following steps only if interference appears
in the TV picture after you have moved to a different
area or a new station has started broadcasting in your
area, or if you change the connection from RF connec-
tion to AV connection, or vise versa.
11
Turn on DVD+VCR and TV.
2
2
Set the vacant position 22 on your TV.
3
3
Press
on the remote control to enter the
standby mode (the clock indicator will be
dimmed).
4
4
Press and hold C or - on the
DVD+VCR for more than 4 secs.
RF 22
will appear in the DVD+VCR display.
The following picture will be displayed on the TV
screen.
If the picture is snowy, move to step 5.
If the picture is clean, press on the DVD+VCR
to store the RF channel. The video channel is now
set.
5
5
Press C or - on the DVD+VCR to set
the video channel to a vacant position between
22 and 68 which is not occupied by any local
station in your area.
Note
The RF channel will not change until step 6 has been
executed.
6
6
Press to store the new RF channel into the
DVD+VCR.
77
Press to bring the DVD+VCR from standby
to on and follow your TV manufacturers tuning
instruction manual to tune a new channel to the
DVD+VCR.
Using your DVD+VCR for the very first time
For the following steps we assume that you have just
connected your DVD+VCR for the very first time.
To make tuning TV stations an easy task your
DVD+VCR incorporates the
Automatic Channel
Memory System (ACMS)
. This system will automatical-
ly tune and store TV channels in VIDEO Plus+ System
order to your DVD+VCR.
While this is happening the clock (date & time) in the
DVD+VCR will be set automatically.
11
Make sure that you have correctly installed your
DVD+VCR.
2
2
Press to turn on your DVD+VCR.
If the initial Menu Screen doesn’t appear on screen,
make sure that you have tuned your TV to a video
channel. Or if this is correct it may mean that your
DVD+VCR is already tuned.
3
3
Press OK to start the automatic tuning process.
4
4
After storing all available TV stations your
DVD+VCR will sort them into VIDEO Plus+
System order.
TV Station
Programme number
BBC1
PR01
BBC2
PR02
ITV
PR03
CH4 (S4C)
PR04
CH5
PR05
Satellite
PR06
5
5
Press
i
to remove the menus from the TV
screen.
i
RF CHANNEL 22
SET
P
R
01
C23
00
BBC1
02
C26
00
BBC2
03
C30
00
ITV
E
S
i
Pr-12
ACMS
ACMS
D
OK
i
Pr-12
ACMS
