7
SELECTING THE FREQUENCY BAND……………..(2)
At radio mode, press
BND/LOUD
button (2) quickly to select the desired band.
The band will change in the following order:
FM1 FM2 FM3 MW LW
RADIO TUNING…………………………………………(3)
Press the
MANU/SKIP
or
button (3) shortly to activate automatic seek function.
Press for several seconds until “MANUAL” appears on the display, the manual tuning mode is
selected. If both buttons have not been pressed for several seconds, they will return to seek
tuning mode and “AUTO” appears on the display.
AUTOMATIC MEMORY
STORING & PROGRAM SCANNING…………….…(4)
-
Automatic memory storing
Press
AS/PS
button (4)
for several seconds, the radio searches for the six strongest
stations and stores them into the presets of the currently selected band. While searching,
”LOC” appears on the display.
- Program scanning
Press
AS/PS
button (4) shortly to scan preset station in memory.
STORING PRESET STATIONS .................................(5)
The preset buttons (5) can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and
MW, LW) for convenient access to your favorite stations.
• Programming stations .....
1.
Select the desired band, then tune in the station you want to
store in memory.
2.
Press and hold one of the preset buttons (5) for more than 2
seconds until the corresponding preset button number appears.
Repeat steps 1. and 2. to program additional stations.
• Quick tuning .................... Select the desired band, then press one of the six preset buttons (5).
LOCAL/DISTANT SELECTION ...................…......….(6)
Press
LOC
button (6) to set local or distant stations.
Use local position (LOC appear on the display) for reception of strong station, and distant
position (DX appears on the display) for reception of weaker stations. This function is effective
during AUTO SEEK operation.
MONO/STEREO.......................……………………….(7)
Press
MON
button (7) to select mono or stereo mode. You can sometimes improve reception of
distant stations by selecting mono operation..
