![Sanyo FXD-885GD Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/sanyo/fxd-885gd/fxd-885gd_operating-instruction_359863008.webp)
-7-
GENERAL OPERATION
TURNING THE POWER ON
........................................ 1
Install the front panel and press the POWER button
for more than 2 seconds when ACC is on.
TURNING THE POWER OFF
...................................... 1
Press the POWER button
for more than 2 seconds to stop the current operation.
ELECTRONIC CONTROLS
......................................... 2
Press the AUDIO button
, then press the AUDIO button
to select
the audio functions as shown in the table below.
Turn the VOL knob
to adjust the selected function ; bass, treble, balance, fade, or volume.
SOUND EFFECT BUTTON
......................................... 3
Press the SOUND Button
.
Each time the button is pressed, the function changes as shown below.
When the audio control button (AUDIO) is pressed until two beep sounds are heard, and while the volume
and sound quality adjustment mode is displayed, the display changes from volume and sound quality
adjustment mode to the operation display. The volume and sound quality adjustments made at that time
remain.
4
2
3
6
5
1
MODE
bAS(bass)
TRE(treble)
bAL(balance)
FAd(fader)
VOL(volume)
Turn left (Min)
Down -5
Down -5
Left L9
Rear R9
Down 0
Turn right (Max)
UP +5
UP +5
Right R9
Front F9
UP 35
FLAT
JAZZ
ROCK
While no other mode is displayed, the VOL knob function as a volume control.
Note
FXD‑885GD̲E.fm 7 ページ 2003年11月11日 火曜日 午前11時40分