background image

COMPACT DISC CARE 

Dirt, dust, scratches and warpage can cause a deterioration in the sound or intermittent skipping 
some tracks during play. 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

         
       
 
 
     
 
 
 

 

3

Recommended CD-R/RW Media

Data may not be properly written to CD-R/RW media depending on the quality of the media.
If this happens, the data may not be reproduced correctly. We recommend the following 
manufacturers to insure proper quality of the media. 

CD-R Media 

TDK USA Corp., Taiyo Yuden (U.S.A.), Inc., Ricoh Corporation, Eastman Kodak Company,
Maxell Corporation of America, Mitsubishi Chemical Corporation, Fuji Photo Film U.S.A., 
Inc., Mitsui Chemicals, Inc., Sony Corporation of America, Philips Electronics North 
America Corporation, Imation Corp. 

CD-RW Media

 

 

TDK USA Corp., Ricoh Corporation, Mitsubishi Chemical Corporation. 
Additionally, CD-R media compatible with various speeds such as 2X and 1X-4X are 
available. Please refer to the instruction manuals of the drive and the recording software 
you are using to selection of the correct media.

 

• Never use chemicals such as record cleaning 

sprays, antistatic sprays or fluids, benzene 
or thinner to clean compact discs. 
These chemicals will permanently damage 
the plastic surface of the disc. 

• When not using the disc player for extended 

periods of time, remove the compact disc and
return it to the plastic storage case. This will 
protect the disc from dust and exposure to 
the sun.

 

• To prevent warping the disc, do not expose 

it to direct sunlight, high humidity or high 
temperatures for extended periods of time. 

• Fingerprints and dust should be carefully 

wiped off the signal surface of the disc 
(glossy side) with a soft cloth. 
Wipe in a straight motion from the inside to 
the outside of the disc. Unlike conventional 
records, the compact disc has no grooves to
collect dust and debris. Small dust particles 
will have no effect on reproduction quality. 

• Do not insert a disc which is cracked into the 

unit. 

• Do not apply paper or write anything on the 

surface of the disc.

 

 

• Do not use non-conventional discs such as 

heart- shaped, octagonal discs, etc. 
The player could be damaged. 

 

• This unit has been designed to play compact 

discs bearing the identification logo shown on
the left. No other discs can be played. 

 

ReWritable

TEXT

Содержание FXD-680GD




















Отзывы: