-10-
BASS CONTROL
....................................................... 3
Press the SOUND button
for more than 1.5 second to switch ON/OFF of the BASS mode. When the BASS
mode is on, “BASS” is displayed and the bass enhances.
RADIO SELECTION BUTTON (BAND)
......................... 4
Press the BAND button
to switch from CD player, CD changer or tape mode to radio.
Each time the button is pressed, the function changes as shown below.
TAPE, CD PLAYER OR CD CHANGER* SELECTION
BUTTON (CD/TAPE/CD-CH)
....................................... 5
Press the CD/TAPE/ CD-CH button
to switch from radio or tape mode to CD player or CD changer* mode.
*If a CD changer is connected.
Pressing the button will change the mode as follows.
CLOCK BUTTON (DISP)
............................................ 6
Press the DISP button
to switch between the clock and audio display. When an audio function is
performed while the time display is selected, the audio display will appear for 5 seconds, then the display
will return to the time mode.
TO CANCEL THE BEEP TONES
................................. 1, 7
Turn off the power by depressing the POWER button
.
To cancel all beep tones, press the POWER button
and the ATP button
simultaneously for more
than 3 seconds and then "bP : OF" is displayed.
To turn on the beep tones again, perform the same procedure. The beep tones are set and "bP : on" is
displayed.
1
2
3
FMI
FMII
AM
FMIII
Radio
CD player
CD changer
TAPE
•
When a CD is not loaded in the CD player, the CD player mode is skipped.
•
When a cassette is not loaded in the cassette player, the TAPE mode is skipped.
•
When a CD changer is not connected, the CD changer mode is skipped.
Notes
