EN
22
RECORDING
Satellite Link
You can set the unit to start recording whenever it
detects a video signal from the external tuner.
Preparing for the Satellite Link:
•
Only L1 (rear) is available for satellite link and be sure
that this L1 needs to be connected by the external
tuner.
•
The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to the output audio/video signals when it comes to the
time you want to start recording, and stop those signals
when it comes to the time you want to finish recording.
Refer to the tuner’s manual on how to set the timer.
DIGITAL
AUDIO OUT
COAXIAL
AUDIO OUT
DVD
VCR
DVD/VCR
COMPONENT
VIDEO OUT
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
L
L
Y
R
R
CB
CR
VCR
AUDIO IN
VIDEO IN
To video out jack
L1
external tuner
To audio(L)out jack
RCA audio/video cables
VHS
V
V
V
V
V S
VHS
VHS
Press
first.
1
Press
to select the desired
tape speed.
SP
2
In the stop mode, press
SETUP
.
3
Use
/
to select
“SATELLITE LINK”. Then, press
to go to the next step.
- M E N U -
TIMER PROGRAMMING
B
SATELLITE LINK
AUTO REPEAT
[OFF]
CLOCK SET
LANGUAGE SELECT
4
Use
/
to select the
desired hour. Then, press
to
go to the next step.
SATELLITE LINK
0 1 : 0 0 PM
Then, repeat procedures above
to select the minute as well.
The hour can be selected from 1-12 with AM
or PM.
When the external tuner signal is stopped,
recording will be stopped.
5
Press
to set satellite
link standby mode.
SATELLITE LINK
0 1 : 3 0 PM
[ON]
[TIMER REC] indicator:
lights up and the unit
goes to the DVD mode. If you do not use DVD
function, turn OFF the unit.
An external tuner must be turned ON for
satellite link to start. If external tuner is not set
to output signals, satellite link will remain in
standby mode.
To Cancel the Satellite Link on Standby:
Press
[TIMER SET]
on the remote control or
[
C
A
]
on this unit.
To Cancel the Satellite Link in Progress:
Press
[
C
A
]
on this unit.
Note:
•
Recording picture will be distorted if the copy
protection signal is being detected during satellite
link.
•
When the timer recording and the satellite link
are overlapped, those recordings are recorded as
illustrated below.
e.g.)
In case of the satellite link is overlapped on the
existing timer recording.
timer recording
recording result
satellite link
e.g.)
In case of the timer recording is programmed in
the middle of the satellite link.
timer recording
recording result
satellite link
e.g.)
In case of the timer recording is overlapped on
the existing satellite link.
timer recording
recording result
satellite link
Dubbing a Cassette Tape
Warning:
Unauthorized recordings of copyrighted
cassette tapes may be an infringement of
copyright laws.
AUDIO
VIDEO
AUDIO OUT
L
R
VIDEO OUT
or
output jacks of
external device
RCA audio cable
RCA video cable
front of the unit
L2
You can use a video disc player, cable/satellite box or
other devices with Audio/Video output jacks.
VHS
V
V
V
V
V S
VHS
VHS
Press
first.
1) Press
[SPEED]
on the remote control to select
recording speed (SP or SLP).
2) Press
[INPUT]
on the remote control to select L1 or
L2 whichever Jack the external device is
connected to.
3) Press
[REC]
on the unit, and then start playback of
the external device.
4) To stop recording, press
[
C
A
]
on this unit.
5) Stop playback of the external device.
Note:
•
For best results during dubbing, use buttons on
this unit whenever possible. The remote control
might affect another device’s operation.