Sanyo EM-S7720B, Инструкция по эксплуатации

Страница: 10 / 13

that, press START/QUICK START to
resume.
A
UTO
D
EFROST
The oven could be used to defrost food
based on the weight you entered. The
defrosting time and power level are
automatically set once the weight is
programmed. The weight varies from 100g to
1800g.
Suppose you want to defrost 600g of shrimp.
1. Place the shrimp to be defrosted into
the oven and close the door.
2. Press AUTO DEFROST button once.
3. Press WEIGHT ADJUST to select
weight of 600g.
4. Press START/QUICK START.
Note:
During defrosting process, the system will
pause to remind user to turn food over, after
that, press START/QUICK START to
resume.
M
ULTISTAGE
C
OOKING
For best results, some recipes call for one
cooking power for a certain length of time,
and another cooking power for another
length of time. The lower the cook power,
the slower the cooking. Your oven can be
set to change from one to another
automatically, for up to 2 cycles.
Suppose you want to set the following
cooking program.
Speed Defrost
↓
Microwave Cooking
1. Input a speed defrosting program.
a. Press SPEED DEFROST button
once.
b. Turn MENU/TIME dial to set
cooking time.
2. Press MULTI STAGE COOKING button.
3. Input a microwave cooking program.
a. Press POWER LEVEL button to set
the power level.
b. Turn MENU/TIME to the certain
cooking time.
4. Press START/QUICK START button.
Note:
Auto Cook and Auto Defrost can not be set
in Multi-stage cooking program; Speed
Defrost can be only set in the first stage.
C
HILD
L
OCK
Use to prevent unsupervised operation of the
oven by little children. The Child Lock
indicator will show up on display screen, and
the oven can not be operated while the Child
Lock is set.
To set: In standby mode, press and hold the
STOP/CANCEL button for 3 seconds, a beep
sounds and lock indicator lights.
To cancel: Press and hold the STOP/
CANCEL button for 3 seconds until lock
indicator light on display turns off.
A
UTO
C
OOK
For food or the following cooking mode, it is not necessary to program the duration and the cooking
power. It is sufficient to indicate the type of food that you wish to cook as well as the weight of this food.
You may need to turn food over during cooking time to obtain uniform cooking.
1.
In standby mode, turn MENU/TIME dial in anti-clockwise direction once and rotate it until the
display shows your desired menu code.
2.
Press WEIGHT ADJUST button repeatedly to indicate food weight or number of servings.
3.
Press START/QUICK START to start.