Sanyo DTA-2680, Инструкция по эксплуатации

Страница: 21 / 30

20
To repeat a track or disc
Random play function
PROGRAMMED PLAYBACK
Reviewing programs
Press the PROG button repeatedly. The track number
p r o g r a m m e d o n e a c h p r o g r a m n u m b e r w i l l b e
displayed.
The CD player enables you to program up to 64 tracks in a sequence of your choice. First select CD stop
mode.
1.
Press the PROG button one time.
3. Press PROG button again; then track 4 is
stored.
2. Press the SKIP Forward or Backward buttons
to select the desired track to be programmed.
For example:
4.
Continue to program, repeat steps 2 and 3.
Press PLAY/PAUSE button to play the program
tracks. 5.
Press REPEAT button on remote control one time,
"one track repeat" will be active. “REPEAT” shows
on display.
One track repeat
With one more press, "all track repeat" will be active.
“REPEAT ALL” shows on display.
All track repeat
Press RANDOM button on remote control during
CD play or stop mode to start random play.
Pressing once again will cancel the function.
Note: Random play cannot operate while playing
programmed tracks.
Random playing start
Intro play function
In the stop condition, press the INTRO button to start the
intro playing. After that the first 10 seconds of each song
will be played.
If the INTRO button is pressed again, the CD will change to
normal playing mode.
Intro playing
Program input mode
Choose track 4
Note: If the program function has stopped, press the
PROG button and then press the PLAY/PAUSE button,
the program play will start.
Clear the program
In stop mode, press the PROG button one time and then
press the STOP button. The preset programs will be
cancelled.
With one further press, the repeat mode is
cancelled.