Sanyo DSR-5016, Краткое руководство по эксплуатации, Страница: 8 / 20

DSR-5016 series Quick Operation Guide
Timer recording
Press the [TIMER] button.
24
hour
Recording is done for the set time periods.
12
Record Record
• TIMER REC settings
After completing the TIMER REC settings:
The start/stop time for recording can be set using the timer function.
(1) (2) (3) (4) (5) (6)
(7)
<TIMER SET>
WEEK START STOP PROGRAM FPS SET
SUN
MON
TUE
WED
THU
FRI
SAT
DLY
EXT
Press the [MENU] button.
Select “2. RECORD SET”
Select “6. TIMER SET”
(1) WEEK
(2) START
(3) STOP
(4) PROGRAM
This column is used to enable timer recording using
the program function “P-1” through “P-4”.
(For further details, refer to Instruction Manual p.85.)
(5) FPS
This column is used to set the recording rate.
(6) SET
This column is used to set timer recording to “ON” or
“OFF”.
(7) Settings for timer recording of over 24 hours
Use these lines for timer recording spanning more
than 24 hours. (For further details, refer to Instruction
Manual p.90.)
1 day
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
*****
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
*****
15 FPS
15 FPS
15 FPS
15 FPS
15 FPS
15 FPS
15 FPS
15 FPS
15 FPS OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
7
Pressing the [MENU RESET] button un-
der the CF slot will clear the settings.
To stop the timer recording before the program-
med stop time, press the
[TIMER] button.
Within the OSD screen, use the jog dial to display sub-menus and move the cursor. Turn the shuttle ring
clockwise to select an entry. Turning it counterclockwise will bring up the previous screen.
Make settings as required.
Press the [EXIT/OSD] button.
The setting is completed and
the display returns to the
normal screen.