Sanyo DSR-5009P, Инструкция по эксплуатации

Страница: 82 / 227

RECORD SET 2
English
81
7
Turn the jog dial to select the mode
value and then turn the shuttle dial
clockwise.
When “AUTO ALARM COPY” is selected, the <WARNING>
screen is displayed.
[Settings] ( ‹ indicates default setting)
When “AUTO ALARM COPY” is changed to “MANUAL
COPY” the following <WARNING> screen is displayed.
If “MANUAL COPY” is unchanged, the cursor moves to
“REMAINING DISK WARNING”. Proceed to step 9.
8
To initialize, select “YES” with the jog
dial and turn the shuttle dial clockwise.
To not initialize, select “NO” and turn the shuttle dial
clockwise.
9
Turn the shuttle dial clockwise.
“1%” flashes.
10
Turn the jog dial to select the
“REMAINING DISK WARNING” setting
and then turn the shuttle dial clockwise.
The remaining capacity can be set anywhere between 1%
(default setting) and 10%.
11
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
The FULL indicator flashes when the remaining capacity for
the recording areas reaches the specified percentage value.
When the FULL indicator flashes or the recording areas
become full, use overwrite permission. (
J
P.79)
Setting Description
‹ MANUAL COPY Manually copy recording images ( J P.50).
AUTO ALARM
COPY Automatically copy alarm recordings to the
archive area.
<WARNING>
REC RATE SETTING IN THE MENU WILL BE
AUTOMATICALLY ADJUSTED.
ARCHIVE AREA INITIALIZE!
ARE YOU SURE ?
NO
CHANGE:JOG SET:SHUTTLE
<WARNING>
AREA FULL RESET
ARCHIVE AREA
ARE YOU SURE ?
NO
MOVE:JOG SELECT:SHUTTLE
<RECORDING CONDITIONS SET>
RECORDING AREA
OVERWRITE : ON
ARCHIVE AREA
MODE : MANUAL COPY
REMAINING DISK WARNING : 1 %
AUTO DELETE : OFF
<RECORDING CONDITIONS SET>
RECORDING AREA
OVERWRITE : ON
ARCHIVE AREA
MODE : MANUAL COPY
REMAINING DISK WARNING : 1 %
AUTO DELETE : OFF
EXIT/OSD
01-01-05 00:00:00 REC 5% EN A ALARM 0000000
02
FULL indicator
Remaining
capacity
display
Operation display
e00_l8hbd_us_7.book Page 81 Thursday, March 31, 2005 5:49 PM