Sanyo DSR-3709P, Инструкция по эксплуатации

Страница: 86 / 126

RECORD SET 3
English
85
2
Turn the jog dial to set “MAIN MON.
DISPLAY”, and then turn the shuttle dial
clockwise.
The cursor moves to “ALARM PRIORITY”.
3
Turn the shuttle dial clockwise and turn
the jog dial to set “ALARM PRIORITY”,
and then turn the shuttle dial clockwise
once again.
The cursor moves to “MON.2 DISPLAY”.
[Settings] ( ‹ indicates default setting)
z After an alarm duration has ended, the display returns
to the screen prior to alarm input.
4
Turn the shuttle dial clockwise and turn
the jog dial to set “MON.2 DISPLAY”
(ON/OFF), and then turn the shuttle dial
clockwise.
The cursor moves to “ALARM RETRIGGER”.
[Settings] ( ‹ indicates default setting)
5
Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
To forcibly cancel an alarm during alarm operation, press
the [CAMERA SELECT] button for the camera inputting
the alarm and hold it for approximately 3 seconds.
Alternatively, connect a switch between the alarm reset
terminal and C (the grounded terminal), and turn on the
switch to cancel any alarm that is occurring.
Setting Description
‹
LAST
When a number of alarms are occurring, the most-
recent alarm video is given priority.
FIRST
When a number of alarms are occurring, only the
video for the first alarm is displayed. However, if
the duration for the alarm with the first input
expires, video for the next alarm will be displayed.
SWITCH
When a number of alarms are occurring, the
display switches between the video from the
corresponding cameras, showing each for one
second.
Setting Description
ON
When an alarm occurs, the corresponding video is
displayed on the monitor 2.
‹
OFF No alarm video is displayed on the monitor 2.
EXIT/OSD
Canceling alarms
C
ALARM
RESET
e00_l8hbg_xe_7.book Page 85 Friday, November 5, 2004 10:21 AM