RECORD SET
3
66
English
SETTINGS
2
Turn the jog dial to select “5. PROGRAM
REC SET”, and then turn the shuttle dial
clockwise.
The <PROGRAM REC SET> screen is displayed with the
cursor positioned on “PROGRAM”.
3
Turn the shuttle dial clockwise.
“P-1” flashes.
4
Turn the jog dial to select a program
number (P-1, for example), and then
turn the shuttle dial clockwise.
The cursor moves to “01” from “SERECT INDIVIDUAL
CAMERA RATE (FPS)”.
5
Turn the shuttle dial clockwise.
“1” (recording rate) flashes.
6
Turn the jog dial to select a recording
rate (6.25, for example), and then turn
the shuttle dial clockwise.
Camera No. 1 is now set to record at a rate of 6.25. The
cursor moves to “02”.
Valid recording rates
25*, 12.5, 6.25, 3.125, 1.563, 1, 0.5, 0.33, 0.25, 0.2, 0.1,
0.05, 0.03 (Unit: FPS)
* A selection cannot be made when pre-alarm recording
has been set to “ON”.
7
Set recording rates for Camera No. 2
and Camera No. 3 in the same way.
8
With the cursor flashing on “04”
(camera number), turn the jog dial to
select “OFF”, and then turn the shuttle
dial clockwise.
Video from Camera No. 4 will not be recorded.
9
Use the same procedure to set Camera
No. 5 and Camera No. 6 to “OFF”.
10
If necessary, use this procedure to
setup other programs (i.e., No. 2
through No. 4).
11
Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
EXIT
e00_l8hbe_xe_7.book Page 66 Monday, May 24, 2004 10:41 AM