7
7
USING THE MULTIMEDIA REMOTE CONTROL
REMOTE CONTROL KEYS
➀
Mode Keys—
Use these keys to program the remote
control and to select the operating mode (
VCR
,
TV
,
CABLE, DVD, SAT
, or
AUX
).
To Operate Your...
VCR—Press the
VCR
key;
Television—Press the
TV
key; Cable Box—Press
the
CABLE
key; DVD Player—Press the
DVD
key;
and Satellite Receiver—Press the
SAT
key.
Note:
Make sure you hold down the mode key
while entering a code number, see page 9
.
➁
Input Key—
In the TV and Satellite modes, this
key selects the program source to display on the
screen (TV signal or signal from equipment con-
nected to the AV jacks). In the VCR mode, this key
functions as a VCR’s TV/ VCR key.
➂
Number Keys—
Two keys must be pressed to select
a channel.
Example
: Press
0
then
6
to select channel
6. For cable channels 100 through 125, press and
hold the
1
key until C1– – appears. Then press the
other two numbers.
➃
Caption Key
—See page 13.
Operates your TV, VCR, DVD Player, Cable converter box, and Satellite Receiver. To
program the remote control, see pages 9 ~ 11.
INSTALL BATTERIES AS SHOWN (2 AA, not included)
Notes:
– Do not mix old batteries with new ones or mix different types of bat-
teries together.
– Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposed
of properly in compliance with all applicable laws. For detailed information,
contact your local County Solid Waste Authority.
QuickTips
■
Be sure batteries are
installed correctly.
■
Point the remote
control toward the
equipment you want to
operate. Objects bet-
ween the remote
control and the equip-
ment may cause
misoperation of the
remote control
function.
■
If the remote control
does not work: Press
T V
key (see item 1).
■
The remote control
must be programmed
before it will operate
your VCR, DVD
Player, Satellite
Receiver, or Cable
Box. See pages 9~11.
Note: Sanyo VCR
and DVD codes are
preprogrammed.
■
Cannot select
channel with number
keys. Press “0 ”in
front of numbers 1~9.
Example: Channel 05.
■
Adjusting the volume
level: Flashing Right
arrow indicates
volume is increasing
and flashing Left
arrow indicates
volume is decreasing.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
2
3
1
4
7
8
0
9
5
6
INPUT
CAPTION
SLEEP
MENU
MUTE
RECALL
POWER
RESET
DVD
SAT
AUX
VCR
TV
CABLE
DISPLAY
VOL
VOL
CH
CH
➀
➁
➂
➃
▲
▲
(Continued on page 8.)
DS31820_3763-- 8/17/05 12:59 PM Page 7
