2-4: CONTRAST 40
2-5: CONTRAST CENTER
1.
Place the set in Aging Test for more than 30 minutes.
1.
Place the set in Aging Test for more than 30 minutes.
2.
Receive the color bar pattern. (RF Input)
2.
Receive the color bar pattern. (RF Input)
3.
Using the remote control, set the brightness and
3.
Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
4.
Activate the adjustment mode display of
Fig. 1-1
and
4.
Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(58)
on the remote control to
press the channel button
(50)
on the remote control to
select "CONTRAST 40".
select "CONTRAST CENTER".
5.
Press the VOL. UP/DOWN button on the remote control
5.
Press the VOL.UP/DOWN button on the remote control
until the contrast step No. becomes "109".
until the contrast step No. becomes "81".
6.
Check if the picture is normal.
6.
Check if the picture is normal.
7.
Receive the color bar pattern. (VIDEO Input)
7.
Receive the color bar pattern. (VIDEO Input)
8.
Using the remote control, set the brightness and
8.
Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
9.
Press the INPUT SELECT button on the remote
9.
Press the INPUT SELECT button on the remote
control to set to the AV mode.
control to set to the AV mode.
Activate the adjustment mode display of
Fig. 1-1
and
10. Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(58)
on the remote control to
press the channel button
(50)
on the remote control to
select "CONTRAST 40".
select "CONTRAST CENTER".
Press the VOL. UP/DOWN button on the remote control
11. Press the VOL.UP/DOWN button on the remote control
until the contrast step No. becomes "115".
until the contrast step No. becomes "87".
Check if the picture is normal.
12. Check if the picture is normal.
Receive the color bar pattern. (S-VIDEO Input)
13. Receive the color bar pattern. (S-VIDEO Input)
Using the remote control, set the brightness and
14. Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
10.
11.
ELECTRICAL ADJUSTMENTS
12.
13.
14.
D-3
co t ast to o
a pos t o
co t ast to o
a pos t o
Press the INPUT SELECT button on the remote
15. Press the INPUT SELECT button on the remote
control to set to the AV(Y/C) mode. Then perform the
control to set to the AV(Y/C) mode. Then perform the
above adjustments 10~12.
above adjustments 10~12.
Playback the DVD(480i) disc. (COMPONENT Input)
16. Playback the DVD(480i) disc. (COMPONENT Input)
Using the remote control, set the brightness and
17. Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
Press the INPUT SELECT button on the remote
18. Press the INPUT SELECT button on the remote
control to set to the COMPONENT mode.
control to set to the COMPONENT mode.
Activate the adjustment mode display of
Fig. 1-1
and
19. Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(58)
on the remote control to
press the channel button
(50)
on the remote control to
select "CONTRAST 40".
select "CONTRAST CENTER".
Press the VOL. UP/DOWN button on the remote control
20. Press the VOL.UP/DOWN button on the remote control
until the contrast step No. becomes "113".
until the contrast step No. becomes "83".
Check if the picture is normal.
21. Check if the picture is normal.
Playback the DVD(480i) disc. (HDMI Input)
22. Playback the DVD(480i) disc. (HDMI Input)
Using the remote control, set the brightness and
23. Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
Press the INPUT SELECT button on the remote
24. Press the INPUT SELECT button on the remote
control to set to the HDMI mode.
control to set to the HDMI mode.
Activate the adjustment mode display of
Fig. 1-1
and
25. Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(58)
on the remote control to
press the channel button
(50)
on the remote control to
select "CONTRAST 40".
select "CONTRAST CENTER".
Press the VOL. UP/DOWN button on the remote control
26. Press the VOL.UP/DOWN button on the remote control
until the contrast step No. becomes "92".
until the contrast step No. becomes "69".
Check if the picture is normal.
27. Check if the picture is normal.
21.
15.
16.
17.
18.
19.
20.
22.
23.
24.
25.
26.
27.
D-3
Содержание DP19640 - 18.5" Diagonal LCD HDTV 720p
Страница 54: ...SPEC NO M3AI 03W O R NO K033058 ...
