- 5 -
- 4 -
SERVICE MODE
C. Setup Procedures
1. Displaying SERVICE MODE screen
Display Service Mode screen following the instructions "How to
enter Service Mode" above.
Region
0
M a r k e t
W M
BackendVersion S21225A0
LoaderVersion
16 Z08 W03
Service Mode Screen
Value
2. Displaying Internal Setup screen
Push NEXT button within three seconds after operating the
Service Mode display.
On the Internal Setup screen shown on the right, set up
Market and Region.
3. Setting Market code
3.1. While a highlighted indicator is displayed on the right side
of the Market denotation, push numeric buttons on the
remote controller.
When you push wrong number , push CLEAR button.
(The indicator reset to "00")
Be sure to input by double figures.
For example , in SS input 0 and 5.
3.2. Specify the code of the model in accordance with the
Market/Region Setup Table above.
3.3 Once the desired code is displayed, push
p
button to
move the highlighted indicator to the Region input area.
Market/Region setup table.
Model
Market
Region
DC-PT100/XE
03
2
Internal Setup
M a r k e t
t W M
Region
1
Exit
00-WM 01-SFC 02-UK 03-XE
S18
05-SS 06-PA 07-AU 08-CN 09-JP
00
04-
Internal Setup
M a r k e t
t W M
Region
1
Exit
00-WM 01-SFC 02-UK 03-XE
S18
05-SS 06-PA 07-AU 08-CN 09-JP
00
04-
Input number
by pushing number keys.
VOLUME
SOUND
FUNCTIO
N
SURRO
UND
TUNING
PRESET
PHONES
POWER
OPEN/CLOSE
SOUND VOLUME
FUNCTION
SURROUND
IR
PLAY
STOP
PRESET,SKIP/NEXT/PREVIOUS
TUNING,FF/FR
SERVICE MODE
B. How to enter Service Mode.
You can enter Service Mode in any one of the following ways (1 to 3).
1. Using the buttons on the main unit
Immediately (within one second) after pushing both SOUNDand POWER buttons simultaneously, push PLAY button.
A. Market / Region SETUP
In the initial condition for this model, Market and Region
information are undefined.
In the following cases, be sure to set up Market/Region.
1. When updating the system using CD-R
(Part code : 0PRADC9674--A).
2. When replacing a DVD substrate.
While Market/Region information are undefined, the message
"Region Undefined" is displayed on the screen.
NOTE: Even if the condition is not under 1 or 2 above, if the
message "Region Undefined" is displayed, be sure to set up
Market/Region.
2. Pushing the covered key located beneath Book Mark key on RB-
1500 or REM-S1500.
3. Simultaneously pushing both Shift key and ON SCREEN key on
RB-SL30K.
RB-TS760
PT100