1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
REMOTE CONTROL
1. STANDBY/ON BUTTON
2. ID3/
ST BUTTON
3. OPEN/CLOSE BUTTON
4. TIMER BUTTON
5. FUNCTION BUTTON
6. iPod/MEM/C-ADJ. BUTTON
7. SLEEP BUTTON
8. SKIP/TUNE SEARCH DOWN BUTTON
9. INTRO BUTTON
10.EQ BUTTON
11.REPEAT BUTTON
12.MUTE BUTTON
13.VOLUME “-” BUTTON
14.VOLUME “+” BUTTON
15.RANDOM BUTTON
16.PRESET/FOLDER UP BUTTON
17.PRESET/FOLDER DOWN BUTTON
18.SKIP/TUNE SEARCH UP BUTTON
19.PLAY/PAUSE/ENTER BUTTON
20.STOP/MENU BUTTON
MO
.
/
.
FROM THE CENTRE
TO THE EDGE
INCORRECT
CORRECT
A
B
C
D
G
E
F
**BUTTON BATTERY INCLUDED**
Please remove safety strip before
using the unit
Change the button
battery
PUTTING THE BATTERY INTO THE REMOTE CONTROL UNIT
Press down the compartment cover, and slide the cover off to open it.
Place the button battery (CR2032) into it according to the polarity
markings with the “+” sign facing up. Place the cover over the
compartment, push it upward until it snaps on. Point remote control
unit no more than 6m from the remote sensor and at an angle of no
greater than 30°.
Note :When the batteries become weak, remote control will not
function and replace with new batteries.
LCD DISPLAY WINDOW
A. SLEEP INDICATOR
B. TIMER INDICATOR
C. ALBUM/RADIO MEMORY NUMBER INDICATOR
D.
INDICATOR
E. STEREO INDICATOR
F. VOLUME HIGH/LOW INDICATOR
G.TRACK/NUMBER/TIME INDICATOR
REPEAT 1 & ALL
COMPACT DISC
1. Always use a compact discs bearing the mark as shown.
2. Notes on handling discs
Removing the disc from its storage case and
loading it.
* Do not touch the reflective recorded surface.
* Do not stick paper or write anything on the
surface.
* Do not bend the disc.
3. Storage
* Store the disc in its case.
* Do not expose discs to direct sunlight or high temperatures,
high humidity or dusty places.
4. Cleaning a disc
* Should the disc become soiled, wipe off dust, dirt and
fingerprints with a soft cloth.
* The disc should be cleaned from the center to the edge.
* Never use benzene, thinners, record cleaner fluid or anti
static spray.
* Be sure to close the CD door so the lens is not
contaminated by dust.
* Do not touch the lens.
4