Sanyo DC-C10, Руководство по обслуживанию

Страница: 33 / 33

- 9 -
Displayment occurs
*The gear inside HOLDER(CM04) "R" engaged at
the displaced position
*The gear of HOLDER(CM04) "R" displaced with the
gear of CARRIAGE
*PC BOARD B and Home switch circuit (CM06)
defective
*Control PC BOARD attached in the final process
defective
Rotates MOTOR DRAWER (CM49)
Inactive
*PC BOARD (CM06,07) incompletely soldered
*MOTOR defective
*Control PC BOARD (CM05) attached in the final
defective
Moves DRAWER toward CLOSE
DRAWER will not move
*Belt detached or cut
*MOTOR pulley turns idly
*GEAR IDLER A2(CM39) disengaged with DRAWER
due to incomplete engagement of DRAWER with
the chassis
*CM39, 40 and 47 gear shaft clearance insufficient
*Foreign matters into CM39, 40 and 47 gears
Completes an initial operation
Not complete an initial operation
*PLATE SPRING (CM29) broken or detached
*SPRING (CM52) broken or detached
*Galling ofARM STOPPER A2 (CM37)
*Galling of ARM STOPPER B (CM38)
*PC BOARD (CM06,07) incompletely soldered
*PC BOARD C (CM06) switch defective
*PC BOARD A (CM05) switches defective
*Control PC BOARD attached in the final process
defective
*CARRIAGE (CM13,14) defective
*SPRING (CM46) detached
Confirm to able PLAY mode or not
GOOD Check the Playback circuit